The Mitsubishi Enhanced Diagnostics Add-on adds dealer-level diagnostics for Mitsubishi vehicles with model years 2009 - 2022. You can read and clear trouble codes from proprietary modules such as ABS, Airbag, Transmission, Body Control, and many others. You also get access to hundreds of parameters and sensors that are not available over standard OBD2.
The Mitsubishi Enhanced Diagnostics Add-on is available for TouchScan for Windows and OBDwiz. Upon purchase, you will receive an email with instructions for activating and downloading the add-on.
Get access to hundreds of enhanced parameters (PIDs) that are not available over standard OBD2. Enhanced PIDs can be graphed, added to the dashboard, or viewed on the data grid page.
Read and clear manufacturer-specific diagnostic trouble codes from enhanced vehicle modules. Determine why your ABS light is on by reading ABS trouble codes.
Get trouble code descriptions that are specific to your vehicle. Many of the descriptions also include help information that pinpoint the cause of the fault.
The Mitsubishi Enhanced Add-on provides access to the following modules.
Your Mitsubishi vehicle will support a subset of the modules listed below, depending on the vehicle year, model, and options.
|4WS/Electric Power Steering||8ch CAN Gateway|
|ABS/ASC/ASTC/WSS||Active Stability Control|
|Active Yaw Control/Active Center Differential||Adaptive Cruise Control/Forward Collision Mitigation|
|Air Conditioner||Air Conditioning|
|All Mode AWD / 4WD||All Wheel Control|
|Antilock Brake System||Audio Amplifier|
|Audio Navigation Display||Audio System|
|Auto Drive Pos.||Battery Management Unit|
|Battery Management Unit (Sub)||BCM|
|Blind Spot Warning||Blind Spot Warning (Sub)|
|CCN||Cell Monitor Unit 1|
|Cell Monitor Unit 2||Cell Monitor Unit 3|
|Cell Monitor Unit 4||Cell Monitor Unit 5|
|Cell Monitor Unit 6||Cell Monitor Unit 7|
|Cell Monitor Unit 8||Cell Monitor Unit 9|
|Cell Monitor Unit 10||Cell Monitor Unit 11|
|Cell Monitor Unit 12||Chassis Control|
|Compressor and Heater Controller||Corner Sensor/Sonar|
|Cruise Control||DC/DC Converter|
|Electric Heater||Electric Lift Gate|
|Electric Parking Brake||Electric Power Steering|
|Electric Vehicle ECU||Electronic Time and Alarm Control|
|Engine||EPS / DAST 3|
|EV/MiEV Remote System||F.A.S.T./OSS/IMMO/Keyless|
|F-MCU||Forward Collision Mitigation System|
|Forward Collision/Lane Departure/Auto High Beam||Four Wheel Drive|
|Generator Control Unit||Hands Free Module|
|Head Up Display||HVAC|
|Keyless Operation and Immobilizer||Keyless Operation, Immobilizer, TPMS|
|Lane Camera||Lane Departure Warning|
|Laser/Radar||Meter / M&A|
|MiEV Remote System||Motor Control Unit|
|Multi Around Monitor||Multi AV|
|Multi Channel Gateway||Occupant Classification Module|
|Occupant Detection||On-board Charger|
|One-touch Start/Stop System||ORC|
|Plug-in Hybrid Module||Power liftgate|
|Shift-lever||Side radar (Rear left)|
|Side radar (Rear right)||Sonar|
|SRS Airbag||Steering Angle Sensor|
|Telematics||Tire Pressure Monitor|
|Transmission Control Module||Wireless charger|
|Wireless Control Module|
You must have a valid TouchScan or OBDwiz license to purchase this add-on. If you do not have a license then you can get one on the TouchScan page.
The Mitsubishi Enhanced Diagnostics Add-on is designed to work with any scan tool that is based on the ELM 327 command set.
Upon purchase of the add-on, you will receive an email with activation and download instructions. If you do not receive an email within one hour of purchase, please check your spam filter or contact us.
All sales on software licenses are final and cannot be returned.